null

BLUEROCK BRM-60A-B Magnetic Drill Press - 2-Speed Reversible Typhoon Mag Drill

Brand : BLUEROCK TOOLS

(4 reviews) Write a Review
$898.00
SKU:
BRM-60
UPC:
702874146470
Availability:
IN STOCK USA! Ships out the same day if ordered by 1PM PST M-F
Weight:
68.00 LBS
Shipping:
FREE USA Shipping

Typhoon BRM60 Magnetic Drill by BLUEROCK ® Tools 

REVERSIBLE DRILL WITH TWO SPEEDS!!

Specifications:

  • Drilling Capacity Annular Cutters: 7/16” - 2-1/4” (12mm-60mm)
  • Drilling Capacity Twist Drill Bit: 1-1/4" (32mm)
  • Drilling Depth: 2" (50mm)
  • Tool Holder: MT3 with 2pc MT Adapters (MT3-MT2 and MT2-MT1)
    • MT3 3/4" Weldon Shank (for standard annular cutters) 
    • MT3 3/4" Capacity Drill Chuck (for twist drill bits)
  • Motor Data: 120V/AC  60Hz - 1850W
  • Duel Speed: 260 & 470 Revolutions per/min
  • Reversible function, great feature for power tapping and threading. See video below! 
  • Magnetic Adhesion: 4050 lbs
  • G. W.: 72 lbs
  • N. W.: 52 lbs
  • Stroke: 8.75”
  • Measurements Fully Raised: 14-1/2"x7-1/2"x28"
  • Measurements Fully Lowered: 14-1/2"x7-1/2"x19.25"

The BRM-60A-B measures 12.5" long and 4.5" wide. When full raised the height is 28", fully lowered height is 19.25" All dimensions are approximate.

This is a brand NEW Magnetic Drill with one of the largest drilling diameters in it's class.  It comes with a plastic case (for protection during shipping), oil bottle, safety chain, MT key, 2pc MT adapters MT3 Chuck, Chuck Key, MT3 Weldon Shank and hex wrenches.  

THE BIT AND BROACH IN THE PICTURES ARE ALSO NOT INCLUDED.  WE DO HOWEVER SELL SETS OF ANNULAR CUTTERS/BROACHES IN HSS

FOR SHIPPING OUTSIDE OF CONTINENTAL UNITED STATES PLEASE CONTACT FOR SHIPPING QUOTATION, IF NOT OTHERWISE SPECIFIED IN ITEM DESCRIPTION.

 pdf-icon.png

Operating Manual BRM-60

  • 5
    This thing is awesome

    Posted by ammonwhit on 7th Nov 2023

    Dose everything the high end one do for less money would total recommend

  • 5
    Bought in July 2019 tested it one hole worked ok

    Posted by John K on 19th Apr 2023

    Switch is fine. It was the “pc board” with the attached relays. The relay that starts it was stuck open. A good rap with a knuckle and she works fine. I’m thinking it was sitting in my garage and moisture and heat cycle caused a bit of issues when first using it again. Contacts will do that to yah. Drill is great as a tool and I’m glad it was easy and simple to fix, troubleshoot. The manual hinted at the issues with relays.

  • 5
    I love this magnetic drill

    Posted by Russ on 5th Feb 2021

    My first use was building a welding table and have drilled over 400 holes with it. I was also able to use it for "power tapping" since it has a reverse feature. I have tapped almost 200 1/2-13 holes without a problem. Customer service is "hit and miss". If you actually talk to someone they are good. However I have been told on a couple occasions that they would return my call and never did.

  • 4
    works good

    Posted by Clinton on 15th May 2020

    Nice drill. Works as expected so far